Husqvarna Automower 320/330X/420/520/550 Body Chassis Sealing Strip
When you've opened the chassis of your Automower for whatever reason it is recommended to install a new sealing strip. If this is not done there is a greater risk of moisture damage to your Automower's internal parts. This is a new original sealing strip for the body chassis of the Husqvarna Automower models 320, 330X, 420, 430X, 430XH, 440, 450X, 450XH, 520, 550 and 550H (it should not be used for other Automower models).
Installation of this original Husqvarna sealing strip for the Automower models 320, 330X, 420, 430X, 430XH, 440, 450X, 450XH, 520, 550 and 550H is very easy;
- Remove the old sealing strip from the bottom part of the chassis.
- Check that there is no sand, grass or other debris in the trench.
- Align the first end of the sealing strip with the mark on the chassis (as indicated by the arrow).
- Continue to lay the sealing strip clockwise around the chassis half.
- Place the second end of the sealing strip over the first end and then route it out the duct.
- Attach the sealing strip to the bottom using the holder.
|Manufacturer Part Number(s)||581 90 32-01 / 574 87 47-05|
|No. of Pcs. in Packaging||1|
- 30x30x Replacement Blades for Husqvarna Automower and Gardena Robot Mowers (0.75mm/Steel)€39,95 €33,02In stock Available
- Original Repair Kit for Husqvarna Automower Boundary Cables€28,96 €23,93In stock Available
- Original Husqvarna Automower Cable Connectors (5 pieces)€19,95 €16,49In stock Available
- 9x9x Replacement Blades for Husqvarna Automower and Gardena Robot Mowers (0.75mm/Steel)€14,96 €12,36In stock Available
- Original Husqvarna Automower Charging Station Connectors (5 pieces)€14,96 €12,36In stock Available